Products

PRODUCT CENTER
+
  • KYN61-40.jpg

KYN61-40.5 armored removable type AC metal enclosed switch cabinet

Scope of application KYN61-40.5(Z) AC metal enclosed switchgear [hereinafter referred to as switchgear)

Classification:

Intelligent complete equipment

Key words: power transformer Intelligent complete equipment New energy box substation intelligent electric


message

Product Description

Scope of application
KYN61-40.5(Z) AC metal-enclosed switchgear [hereinafter referred to as switchgear) is used in 35kY three-phase AC 50Hz power system as power plants, substations and distribution rooms of industrial and mining enterprises to receive and distribute electric energy, with functions of control, protection and monitoring.
This product meets the requirements of GB3906 "3-35kV AC Metal-enclosed Switchgear", GB/T11022 "Common Technical Requirements for High-voltage Switchgear and Control Equipment Standards", "AC Metal-enclosed Switchgear and Control Equipment with Rated Voltage of 1kV Above 52kY and Below", "Common Terms for High-voltage Switchgear and Control Equipment.
 
Model
 
Use of the environment
> The ambient air temperature does not exceed 40 ℃, and the average value measured within 24 hours does not exceed 35 ℃, and the lowest ambient air temperature is -25 ℃;
> The altitude does not exceed 1000m, and the altitude does not exceed 2000m under special conditions of use;
> The surrounding air is not significantly contaminated by dust, smoke, corrosive and/or flammable gases, vapors or salt spray;
> relative humidity: the average value of relative humidity measured within 24 hours shall not exceed 95%, the average value of water vapor pressure measured within 24 hours shall not exceed 2.2kPa, the average value of monthly relative humidity shall not exceed 90%, and the average value of monthly water vapor pressure shall not exceed 1.8kPa;
> When the equipment is installed, the inclination of the vertical surface shall not exceed 5 °;
> The equipment should be installed in a place without severe vibration and shock.
> Note: Users can negotiate with our company when they have special requirements.
 
Main technical parameters

Other Products

View Details

SC(B)10-10kV series epoxy resin cast dry-type power transformer

The epoxy resin casting dry-type transformer produced by our company is developed by introducing domestic and foreign technology

View Details

SC(B)10-35kV Series Epoxy Insulation Dry-Type Power Transformer

SC(B)10-35kV series dry-type transformers are suitable for special power occasions that need to be directly converted from 35kV grid voltage

View Details

SG(B)10 Series Non-Encapsulated Coil Three-Phase Dry-Type Power Transformer

The non-encapsulated coil three-phase dry-type power transformer produced by our company has the advantages of safety,

What kind of help do I want to give you?

Want To Know More?

Submission