Products

PRODUCT CENTER
+
  • ZLS-10kV级励磁整流变压器(1712051283255).jpg

ZLS-10kV excitation rectifier transformer

The excitation rectifier transformers produced by our company include the following three categories: 1. oil-immersed excitation rectifier transformers,

Classification:

Power Transformer

Keywords: Power Transformer, Intelligent Complete Equipment, New Energy Box-type Substation, Intelligent Electric


Get A Quote

Product Description

  Scope of use

The excitation rectifier transformer produced by our company includes the following three categories: 1. oil-immersed excitation rectifier transformer; 2. pouring dry-type excitation rectifier transformer; 3. open type ordinary dry-type transformer. The excitation rectifier transformer is mainly used in the generator self-recovery excitation system. The excitation rectifier transformer produced by our company has strong excitation capacity. By adding isolation screen between the secondary windings of the 1., the parasitic capacitance of the transformer can be effectively shielded and the influence of harmonics on the excitation system can be suppressed. The design capacity of the excitation rectifier transformer is larger than the actual nameplate capacity, which can effectively suppress the influence of adverse factors of higher harmonics on the transformer.

  Model meaning

ZLS-10kV级励磁整流变压器

Structural features

The coils are all made of high-strength polyester enameled copper wires and flat copper wires covered with double glass filaments, with cylindrical windings; low-voltage electrical appliances with high current are pie windings. Iron core: all imported H-12, RM-12 high-quality cold-rolled non-oriented silicon steel sheet. It has the advantages of small no-load loss, high lamination coefficient and low noise. The excitation rectifier transformer is mainly used in the generator self-recovery excitation system. It has a strong strong excitation capacity, and can effectively shield the parasitic capacitance of the 1. by adding an isolation screen between the secondary windings of the transformer. And can suppress the influence of harmonics on the excitation system, the design capacity of the excitation rectifier transformer is greater than the actual nameplate capacity. Can effectively suppress the influence of adverse factors of high harmonics on the transformer.

 -General conditions of use

1. Maximum temperature 40 ℃

2. When the air temperature is +25 ℃, the relative humidity shall not exceed 90%

3, the altitude is not more than 1000 meters

4. The installation site has no gas vapor that seriously affects the insulation of the transformer; chemical deposition; dust; dirt and other explosive and corrosive media.

5, the installation site should be no serious vibration and bumps, the vertical slope is less than 5%

6. The AC grid voltage connected to the converter transformer shall meet the following requirements:

(a) The voltage fluctuation is an approximate sine wave.

(B) The amplitude fluctuation shall not exceed + 5%, and the short-term (1 second) fluctuation range shall not exceed + 10%.

(c) A frequency of 50Hz with a variation not exceeding + 1%.

(d) The three-phase voltages are approximately symmetrical.
 

Other Products

View Details

SC(B)10-10kV series epoxy resin cast dry-type power transformer

The epoxy resin casting dry-type transformer produced by our company is developed by introducing domestic and foreign technology

View Details

SC(B)10-35kV Series Epoxy Insulation Dry-Type Power Transformer

SC(B)10-35kV series dry-type transformers are suitable for special power occasions that need to be directly converted from 35kV grid voltage

View Details

SG(B)10 Series Non-Encapsulated Coil Three-Phase Dry-Type Power Transformer

The non-encapsulated coil three-phase dry-type power transformer produced by our company has the advantages of safety,

How Can We Help You Today?

GET IN TOUCH NOW

Submission