Products

PRODUCT CENTER
+
  • e36hz9FuS--TG9lk0OP6CA.jpg

YB6-12/0.4 Pre-installed Substation (US)

Product Overview YB6-12/0.4 pre-installed substation is suitable for 10kV ring network power supply,

Classification:

Intelligent complete equipment

Key words: power transformer Intelligent complete equipment New energy box substation intelligent electric


message

Product Description

Product overview
 
YB6-12/0.4 pre-installed substation is suitable for 10kV ring network power supply, dual power supply or terminal power supply system, as a new residential area, green belt, park, station, wharf, hotel, construction site, airport and other places of power transformation, distribution, measurement, compensation, control and protection device.
This product conforms to the "high voltage/low voltage prefabricated substation", "high voltage/low voltage prefabricated substation".
 
Model
 
 
Use of the environment
 
> The ambient air temperature does not exceed 40 ℃, and the average value measured within 24 hours does not exceed 35 ℃, and the lowest ambient air temperature is -25 ℃;
> altitude not exceeding 1000m;
> The surrounding air is not significantly contaminated by dust, smoke, corrosive and/or flammable gases, vapors or salt spray;
> Relative humidity:
A. the average value of relative humidity measured within 24 hours shall not exceed 95%, and the average value of water vapor pressure measured within 24 hours shall not exceed 2.2kPa,
B the average value of moon phase Liu Yun degree shall not exceed 90%, and the average value of monthly water vapor pressure shall not exceed 1.8kPa;
> When the equipment is installed, the inclination from the vertical plane does not exceed 30;
> The equipment should be installed in a place without severe vibration and impact;
Note: Users can negotiate with our company when they have special requirements.
 
Overall dimension
 
 
Capacity (kVA) A B C Weight (kg)
100 2000 1720 1660 1560
125 2000 1720 1660 1640
160 2000 1720 1660 1720
200 2000 1720 1700 1830
250 2000 1720 1700 2000
315 2000 1720 1780 2200
400 2000 1720 1780 2480
500 2000 1720 1780 2900
630 2000 1720 1980 2490
800 2000 1720 2060 3620
1000 2000 1720 2060 4650
 

Technical parameters

 

Project Unit Parameters
Rated voltage High pressure side kV 12
Low pressure side kV 0.4
Rated capacity of transformer kVA 100,125,160,200,250,315,400,500,630,800,1000
No-load voltage regulation   ± 2 × 2.5%
Rated insulation level Lightning impulse withstand voltage a (full wave, peak) kV 75
Power frequency withstand voltage 1min kV 35
Interphase and relative to ground of power frequency withstand voltage at low voltage side (1min) Main circuit kV 2.5
Control and metering circuit kV 2.0
Noise level dB 50
Cooling mode   Natural cooling
Protection level   IP34
 
 

 

Other Products

View Details

SC(B)10-10kV series epoxy resin cast dry-type power transformer

The epoxy resin casting dry-type transformer produced by our company is developed by introducing domestic and foreign technology

View Details

SC(B)10-35kV Series Epoxy Insulation Dry-Type Power Transformer

SC(B)10-35kV series dry-type transformers are suitable for special power occasions that need to be directly converted from 35kV grid voltage

View Details

SG(B)10 Series Non-Encapsulated Coil Three-Phase Dry-Type Power Transformer

The non-encapsulated coil three-phase dry-type power transformer produced by our company has the advantages of safety,

What kind of help do I want to give you?

Want To Know More?

Submission